Teac MP-GT1 Quick Start - Manual (Page 6)

TASCAM MP-GT1
Thank you for purchasing the TASCAM MP-GT1.
This unit is ideal for use when practicing guitar.
If you run into a phrase on a recording that is too
difficult for you to learn by ear at ordinary speed,
you can play and loop the music at a slower speed
to study the part. Furthermore, the dedicated
guitar input allows you to use the unit’s built-in
effects as you play along with the music. You can
also transfer music easily from a computer to the
MP-GT1.
NOTE
An Owner’s Manual with detailed instructions
about the MP-GT1’s functions is stored inside
the unit’s memory in PDF format. (You can also
download this manual from www.tascam.com.)
You will need to have software installed on
your computer that can open PDF documents
to read this manual. If you need this software,
Adobe Reader software can be downloaded for
free from www.adobe.com.
Warnings about the rechargeable
battery
This product uses a built-in lithium ion battery.
Always follow the precautions below in order to
avoid overheating, fire, smoke, leakage and other
problems
Always use the designated AC adapter and/
or USB cable when operating or recharging
the unit with ordinary AC power. Do not use
any AC adapter or USB cable other than those
designated for use with the unit. Overheating
the unit can cause injury, burns, fire, stains
and/or rupture of the battery.
Do not put the unit in a fire. Do not recharge
or leave the unit by a fire, in direct sunlight or
other hot location.
Do not disassemble. Taking apart the unit
could lead to an electrical shock. Please seek
assistance from the store where the unit was
purchased or contact a TASCAM/TEAC
•
•
•
1–Introduction