beautypg.com

Teac HS-8 Firmware V1.30 User Manual

Hs-8, New functions in firmware v1.30, Network functions (ftp, telnet and vnc) added

background image

TASCAM HS-8

1

HS-8

D01219820A

New functions in firmware V1.30

The following functions have been added in firmware V1.30

0

Network functions (FTP, Telnet and VNC)

0

REMOTE/KEYBOARD

and

EXTERNAL Control

Lock/Unlock settings

0

Take Rename function

0

Rec Fn Stop Monitor function

0

Monitor muting function

0

Slate tone function

0

USER BITS Source setting function

0

Addition of take end time code display

0

Ability to receive digital input signals that are in consumer format

0

Clear function can be executed using the SHIFT and BACKSPACE keys on

an external keyboard

0

Cursor can be moved using the up and down arrow (2/x), HOME and END

keys of an external keyboard

0

Title display changes on the

PROJECT

screen

0

PROJECT key now moves up a level when the PROJECT screen is open.

Network functions (FTP, Telnet and VNC) added

ETHERNET page added to the REMOTE SETUP screen

Use this to make settings related to Ethernet communication.

STATUS

This shows the unit's MAC Address and current IP Address.

IP MODE

Use these buttons to enable or disable Ethernet functions.
Setting buttons:

Disable

(default value),

Enable

IP SETUP

Use to switch between DHCP and STATIC.
When set to

DHCP

, and there is a DHCP server on the LAN, the

IP

Address

,

Subnet Mask

and

Default Gateway

items should be

automatically acquired.
When set to STATIC, you must set the

IP Address

,

Subnet Mask

and

Default Gateway

items manually.

Setting buttons:

DHCP

,

STATIC

(default value)

LINK SPEED

Use these buttons to set the link speed.

Setting buttons:

AUTO

(default value automatically adjusts speed accord-

ing to connection),

100M

(operates with fixed speed of 100 Mbps.)

Password

Set the password. (See "CHANGE PASSWORD screen” below.)

IP Address/Subnet Mask/Default Gateway

These show the current values of these settings. When

IP SETUP

is set

to

STATIC

, use these field to set the values. (See “IP Address/Subnet

Mask/Default Gateway editing screen” below.)

Default values: 0. 0. 0. 0

Depending on the

IP SETUP

setting, this area appears differently as

shown below.

DHCP

STATIC

Field selected

IP Address/Subnet Mask/Default Gateway editing screen
Touch the corresponding area of the

REMOTE SETUP

screen

ETHERNET

page to open its value setting screen.

0

Each field can contain up to 3 digits. (You do not need to input “0” before

values of 1–2 digits.)

0

The first field is selected when a screen opens.

0

After a field is selected, touching a number button will enter that digit.

When touched, further digits will be added to the end of the same field.

0

Touch the period (point) button to move to the next field.

Example

Screen opened 192.

168.

1. 1

“1234” input

234.

168.

1. 1

(First “1” is discarded)

“.” input

192.

168.

1. 1

CHANGE PASSWORD screen
Touch the

Change

button in the

Password

section of the

REMOTE

SETUP

screen

ETHERNET

page to open the

CHANGE PASSWORD

screen

where you can set the password.
Up to 9 characters can be used.