Using built-in effects, Using.built-in.effects, Important safety instructions – Teac CD-VT2 User Manual

Page 31: Using mics with the trainer

IMPORTANT SAFETY INSTRUCTIONS

TASCAM CD-VT2

Using mics with the trainer

3 Use the

VALUE

(+, –)

keys to adjust the level. The level

knob icon rotates as you change the value.

NOTE

The input meter at the bottom of this screen shows the
total level of the signal input at the

MIC IN

jacks.

Using built-in effects

This device has a built-in mic effects processor. Press the

EFFECT

key to open the

EFFECTOR

screen.

As shown in the figure above, in addition to

BANK

and

PRESET

, the

EFFECTOR

screen also shows the

LVL

(level)

knob, an icon for the selected mic effect and the

VCH

(voice

change) icon. These all have adjustable settings.
Use the

CURSOR

(

) keys to move between the

LVL

knob,

effect parameter knob and voice change icon. When you select
the

LVL

knob or other parameter, a pop-up appears for the

setting items. Use the

CURSOR

(

) keys to select settings

in the pop-up, and use the

VALUE

(+, –)

keys to adjust these

settings.

BANK
Select bank

–

BYPASS

Using the

PRESET

item explained below, you can set a

preset effect for each bank. By making presets of settings that
you use frequently in each bank, you can quickly recall the
settings you desire just by switching through the banks.
Select

BYPASS

if you do not want to use effects.