Teac UD-501 - Manual (Page 15)

15
EN
Settings (1)
1 Press the POWER button to turn this unit
on.
2 Press the MENU button to show the
setting items.
Press the MENU repeatedly to cycle through the
menu items as shown below.
*UPCONVERT
x
*PCM DF
x
*DSD AF
x
*LINE OUT
x
*OUTPUT BOTH
x
*USB POWER
x
*MODE DISP
x
*DIMMER
x
Input source status
3 Turn the INPUT SELECTOR knob to change
the setting value.
o The currently set value is shown on the display.
4 When you are done changing settings,
press the MENU button to show the input
source again.
o If you do not do anything for 10 seconds, the dis-
play will return to showing the input source.
o You can also press the MENU for 2 seconds or lon-
ger to show the input source.