Super Systems X5 - Manual (Page 24)

4.2.1 NUMERIC ENTRY
(i.e. the modification of the Setpoint
value from 275.0 to 240.0 )
4.2.2 MNEMONIC CODE SETTING
(e.g. configuration see page 26)
24
4 - Operation
4.2 PARAMETER SETTING
275.0
274.8
275.0
274.8
230.0
274.8
240.0
274.8
240.0
°C
Press $ or % momentarily
to change the value by 1 unit
every push.
Hold $ or % to change
the value at rate that doubles
every second.
The rate of change decreases
when the button is released.
The change of the value stops
when it has reached the max./
min limit set for the parameter.
In case of Setpoint modification:
press
$ or % once to
display the local Setpoint
instead of working Setpoint.
To evidence this change the
display flashes once. Then the
Setpoint can be modified
Press the $ or % to display the next or previous mnemonic
for the selected parameter.
Continued pressing of
$ or % will display further mnemonics
at a rate of one mnemonic every 0.5 s. The mnemonic displayed
at the time the next parameter is selected is the one stored and used.
Unit
°C
Unit
°f
Unit
°C
Unit
°f
Unit
none
Unit
ph
Engineering
Units
Celsius
Degree
Fahrenheit
Degree
Celsius
Degree
Fahrenheit
no units
defined
Ph
Operator
mode
working Setpoint
displayed
Local
Setpoint display
Setpoint
modification
Setpoint entry.
The operation is
acknowledged by
one flash of the
display.
after 2 s
————Decrease
————Increase
X5-SSI-uk 18-03-2009 17:53 Pagina 24