Sundance SMT374 - Manual (Page 17)

Version 2.2 Page 17 of 29 SMT374 User Manual
Code Composer
This module is fully compatible with the Code Composer Studio debug and
development environment. This extends to both the software and JTAG debugging
hardware. The driver to use is the tixds6x1x.dvr and each SMT374 should be
declared as
two DSPs . The ROM reprogramming utility, SMT6001, requires CCS
version 3.0 or later.
Application Development
Depending on the complexity of your application, you can develop code for SMT374
modules in several ways.
SMT6400
For simple applications, the Sundance SMT6400 software support package (project
examples) and its associated header files (SmtTim.h and ModSup.h) can suffice.
The SMT6400 product is installed by the Sundance Wizard and it is free of charge.
3L Diamond
This module is fully supported by 3L Diamond, which Sundance recommends for all
but the simplest of applications. An SMT374 has to be declared in configuration files
as two processors of type SMT374_6711 or SMT374_6713, as appropriate.
SMT6500
This is the support package for the FPGA . It may be used to develop your application
in the FPGA of the module.