Sundance SMT363XC2 - Manual (Page 23)

Version 2.2 Page 23 of 27 SMT363XC2 User Manual
LED Descriptions
LED Connection Function
1 FPGA.DONE Shows the state of the FPGA’s configuration.
If this LED is ON, then the FPGA is NOT
configured. This LED should power up in the
ON state and extinguish after a second.
2 FPGA.LED0 Controlled by the LED register.
DSP Heartbeat (SMT6060-TCPIP,
rpcproxy.tsk)
3 FPGA.LED1 Controlled by the LED register.
4 NET50.PORTA0 Controlled by PORTA bit 0 of the NET+50.
Net+50 Heartbeat (SMT6060-TCPIP,
netsocksvr_v0p5p7.dat)
5 NET50.PORTA1 Controlled by PORTA bit 1 of the NET+50.
6 PHY.LED3 Link receive status (ON=receiving, OFF=not
receiving)
7 PHY.LED2/NET50.PORTC6 Link up status (ON=connected,
OFF=disconnected)
8 PHY.LED1 Link speed status (ON=100Mbit,
OFF=10Mbit)