Sundance SMT363XC2 - Manual (Page 13)

Version 2.2 Page 13 of 27 SMT363XC2 User Manual
Comports
The DSP has 6 comports, numbered 0 to 5.
The addresses of the Comport registers are shown in the
Error! Reference source
not found. , and are described in the SMT6400 help file .
SHB
The SMT363XC2 provides one SHB connector, which is connected to the DSP to
give two 16-bit SDB interfaces. These interfaces operate with a fixed clock rate of
100MHz.
Architecture
SDB0 and SDB1 on the DSP are presented on the TIM's SHB connector, SDBA and
SDBB respectively.
SDBA SDBB
The addresses of the SDB registers are shown in the Virtex Memory Map , and are
described in the SMT6400 help file .
Global bus
The SMT363XC2 provides a single global bus interface. This is only accessible from
the DSP. The addresses of the global bus registers are shown in the
Virtex Memory
Map , and are described in the SMT6400 help file .