Sundance SMT6012 v.4.6 - Manual (Page 6)

Version 4.6 Page 6 of 22 SMT6012 User Manual
You need to have at least the following version of CC or CCS installed.
Processor type CC or CCS version required
C4x CC version 4.3
C6x CCS version 1.0 or higher (The FULL VERSION, not the
limited version supplied with an evaluation board).
3 System requirements
3.1 Software
• The PC Operating System must be Windows 9x / NT 4.0 / Windows 2000 or
above.
• On a Windows NT / Windows 2000/ XP system, you must be logged in as a
user with administrative rights.
3.2 Hardware
• The PC must supply 3.3V on the PCI bus. If you are not sure, please check
the voltage between a mounting hole of your carrier card And a Ground from
a PC power cable. Only a few C4x TIMs do not require 3.3V.
• Ensure that the bolt makes contact with the metal ring of the mounting hole.
See the user manual of your carrier board for the details.
User Manual (QCF42); Version 4.6, 26/06/02; © Sundance Multiprocessor Technology Ltd. 2002