Introduction, 2 introduction – Sundance SMT6012 v.4.6 User Manual

Page 5

2 Introduction

The SMT6012 provides the drivers required to use Code Composer (CC) and Code
Composer Studio (CCS) with the following Sundance Multiprocessor Technology
range of carrier boards:
Texas Instruments software, if purchased through Sundance, will include the
SMT6012.

Sundance carrier board

Description

SMT300

Single

TIM cPCI carrier board

SMT300Q

4 TIM cPCI carrier board

SMT310

Single TIM PCI carrier board

SMT310Q

4 TIM PCI carrier board

SMT320 (Obsolete)

4 TIM PCI carrier board

SMT327 (Obsolete)

4 TIM cPCI carrier board

Table 1 - Sundance hardware supported by the SMT6012

The SMT300, SMT300Q, SMT310 and SMT310Q carrier boards all use the driver for
the SMT310. Similarly, the SMT320 and SMT327 both use the driver for the
SMT320. For the remainder of this document, SMT310 will refer to the SMT300,
SMT300Q, SMT310 and the SMT310Q. The SMT320 will refer to the SMT320 and
the SMT327.

If you are using a SMT320, check to make sure which version of the SMT320 you are
using. The version number of a SMT320 is written on the PCB, near the blue handle
and next to the serial number (ADC4-xxxx).

This document describes how to select a CC or CCS driver based on:

• The carrier board you use.
• The version of CC or CCS.
• On-board or off-board debugging requirement.