Studio Technologies 76B 2008 - Manual (Page 24)

Issue 1, July 2008 Model 76B/77B User Guide
Page 24 Studio Technologies, Inc.
for Surround
Confi guration—Input Select Buttons
Default: Surround input A assigned to input 1.
Surround input B assigned to input 2.
No input assigned to input 3 (disabled).
Stereo input A assigned to input 4.
Stereo input B assigned to input 5.
Stereo input C assigned to input 6.
Note: If no input is assigned to an input button that button is disabled.
Press and hold an input to display and select which input source
is assigned to that button in Group 1-3. Press and hold both the
group select button and an input button to display and select
which input is assigned to that button when Group 4-6 is active.
When an input
button is pressed
use the 5.1 to
Stereo button to
assign surround
input A to that
button. Use the
Stereo to Mono
button to assign
surround input B
to that button.
When an input button is pressed use the
L and R buttons to assign stereo input
A to that button. Both L and R LEDs lit
means stereo input A is assigned to that
button as a stereo source. L LED only
lit means channel 1 of stereo input A is
routed to the center output and channel
2 is not used. R LED only lit means chan-
nel 2 of stereo input A is routed to the
center output and channel 1 is not used. When an input button is
pressed use the LS button
to assign stereo input C to
that button. Both LS and RS
LEDs lit means stereo input
C is assigned to that button
as a stereo source. Individ-
ual stereo input C channels
cannot be routed to center
output. When an input button is pressed use the
C and LFE buttons to assign stereo input
B to that button. Both C and LFE LEDs lit
means stereo input B is assigned to that
button as a stereo source. C LED only
lit means channel 1 of stereo input B is
routed to the center output and channel
2 is not used. LFE LED only lit means
channel 2 of stereo input B is routed to the
center output and channel 1 is not used.