beautypg.com

Studio Technologies 55 2002 User Manual

Page 33

background image

Model 55/56 User Guide

Issue 4, June 2002

Studio Technologies, Inc.

Page 33

Model 56 Control Console

Power Requirements:

15Vdc filtered and regulated, 75mA maximum,
provided by Model 55 Central Controller

Connectors:

To Model 55 Central Controller: 5-pin DIN-type,
female

Internal Microphone:

Type: electret condenser

Frequency Response: 3dB roll off at 105Hz

Dimensions (Overall):

7.2 inches wide (18.3cm)
2.2 inches high (5.6cm)
5.4 inches deep (13.7cm)

Mounting:

Desktop. Provision for stand mounting provided.

Weight:

1.7 pounds (0.8kg)

Model 35 Talent Amplifier

Power Requirements:

+20-32Vdc (modulated with left channel audio),
provided by Model 55 Central Controller

Power Present LED: red, indicates presence of
operating power

Connectors:

Input (from Model 55): 3-pin XLR-type, female

Loop Thru: 3-pin XLR-type, male, connected in
parallel with input connector

Headphone Outputs: 2, ¼-inch, 3-conductor
(stereo) phone jacks

Headphone Output: 1, feeds two headphone jacks

Load: intended for connection to one or two pairs
of headphones with total impedance of 75 ohms or
greater

Output Level: user adjustable

Maximum Output Voltage: 16V peak-to-peak into
150 ohms @ 1% THD+Noise, 400Hz

Distortion (THD+N): 0.03%

Frequency Response: 20Hz-20kHz ±0.5dB

Dimensions (Overall):

4.2 inches wide (10.7cm)
2.0 inches high (5.1cm)
5.3 inches deep (13.5cm)

Mounting:

Desktop. Provision for stand mounting available
as option.

Weight:

0.8 pounds (0.4kg)

Model 38 Talent Amplifier

Power Requirements:

+20-32Vdc (modulated with left channel audio),
provided by Model 55 Central Controller

Power Present LED: red, indicates presence of
operating power

Connectors:

Cue Mix Input (from Model 55): 3-pin XLR-type,
female

Cue Mix Input Loop Thru: 3-pin XLR-type male,
connected in parallel with input connector

Talent Input (Left In/Mono and Right In): 3-pin
XLR-type, female

Talent Input Loop Thru: 3-pin XLR-type male,
connected in parallel with input connectors

Headphone Outputs: 2, ¼-inch, 3-conductor
(stereo) phone jacks

Cue Mix Input:

Intended for connection only with Model 55
Central Controller

Talent Input: 1, stereo or mono, switch
selectable

Type: electronically balanced, capacitor
coupled, input impedance 20k ohms

Input Level: switch selectable for microphone or
line-level signals. Expected signal level: Mic
position –40 to –60dBu, Line position –10 to
+10dBu.

This manual is related to the following products: