Model 56 configuration chart—alternate functions – Studio Technologies 55 2002 User Manual
Page 22
Issue 4, June 2002
Model 55/56 User Guide
Page 22
Studio Technologies, Inc.
Model 56 Configuration Chart—Alternate Functions
Press and hold Level
Up to activate alternate
configure functions
Press CR 1 to toggle between
allowing only one control room
source or allowing one or two
control room sources; LED on
means two sources are allowed
Press Talk to Phones to
toggle slate feed to
phones; LED on means
slate to phones is on
Press Slate to toggle
between phones interrupt
and phones add; LED on
means talk to phones is add
This manual is related to the following products:
See also other documents in the category Studio Technologies Equipment:
- 34 (8 pages)
- 2A 2015 (43 pages)
- 41 2013 (25 pages)
- 2A 2013 (41 pages)
- 41 2007 (25 pages)
- 75 (56 pages)
- 41 2004 (22 pages)
- 42A 2013 (25 pages)
- 42A 2008 (25 pages)
- 45DC (23 pages)
- 45A (31 pages)
- 45DR (23 pages)
- 46A (33 pages)
- 47A (33 pages)
- 72 (9 pages)
- 69A 2005 (49 pages)
- 69A 2001 (48 pages)
- 760-03 V.4.15 (53 pages)
- 760-03 V.4.15 (53 pages)
- 760-03 V.4.15 (55 pages)
- M77-00151 (45 pages)
- M76-00151 (37 pages)
- 76DA V.4.00 (51 pages)
- 76DA V.4.02 (53 pages)
- 76DA V.3.00 (47 pages)
- 76DBA V.3.00 (53 pages)
- 780-02 V.4.15 (51 pages)
- 210 2004 (37 pages)
- 212 2013 (37 pages)
- 212 2006 (37 pages)
- 210 2008 (37 pages)
- 214 (33 pages)
- 215 (31 pages)
- M212-00151 (36 pages)
- 220 2013 (43 pages)
- 220 2008 (43 pages)
- 220 2004 (42 pages)
- 230 2014 (51 pages)
- M233-01151 (47 pages)
- 230 2008 (55 pages)
- 5110 V.3.2 (17 pages)
- 240 (37 pages)
- 742A (31 pages)
- M5110-00151 (15 pages)
- 5121 (19 pages)