Studio Technologies 55 2005 - Manual (Page 9)

Model 55/56 User Guide Issue 5, August 2005
Studio Technologies, Inc. Page 9
Model 56 Back Panel
Change the control room
level; listen in mono (L+R);
or reduce the level by a
preset amount Source selection
for control room (CR),
headphones, and
dub; three columns
of LEDs show the
currently selected
sources
Talk to the headphones;
slate; set communications
levels
Confi gure button switches
between normal operation
and confi gure mode
Built-in microphone for
communications functions
(talk to phones, slate)
Connection
to the Model 55
Central Controller
Model 56 Front Panel
Confi guration
The Model 56 Control Console can be
confi gured to make the system meet a
user’s exact operating environment. All
confi guration parameters, along with
“power down” operation conditions, are
stored in nonvolatile memory.
• Each of the four stereo line inputs can
be independently set for –10 dBV or
+4 dBu operating levels.
• Each input can be set for either mono
or stereo operation. In the mono mode a
signal connected to the left input is sent
to the left and right outputs.
• The dub output level can be set for a
nominal –10 dBV or +4 dBu output level.
• Unique to the system is the ability to
confi gure the dim level to one of three
values, allowing a 15, 20, or 25 dB
reduction when dim is active.