beautypg.com

Studio Technologies 55 2005 User Manual

Page 29

background image

Model 55/56 User Guide

Issue 5, August 2005

Studio Technologies, Inc.

Page 29

Model 56 Control Console

Power Requirements: 15 Vdc fi ltered and
regulated, 75 mA maximum, provided by Model 55
Central Controller

Connectors:
To Model 55 Central Controller:
5-pin DIN-type,
female

Internal Microphone:
Type:
electret condenser
Frequency Response: 3 dB roll off at 105 Hz

Dimensions (Overall):
7.2 inches wide (18.3 cm)
2.2 inches high (5.6 cm)
5.4 inches deep (13.7 cm)

Mounting: desktop; provision for stand mounting
provided

Weight: 1.7 pounds (0.8 kg)

Model 35 Talent Amplifi er

Power Requirements: +20-32 Vdc (modulated
with left channel audio), provided by Model 55
Central Controller

Power Present LED: red, indicates presence of
operating power

Connectors:
Input (from Model 55):
3-pin XLR-type, female
Loop Thru: 3-pin XLR-type, male, connected in
parallel with input connector
Headphone Outputs: 2, ¼

-inch, 3-conductor

(stereo) phone jacks

Headphone Output: 1, feeds two headphone jacks
Load: intended for connection to one or two pairs
of headphones with total impedance of 75 ohms or
greater
Output Level: user adjustable
Maximum Output Voltage: 16 V peak-to-peak into
150 ohms @ 1% THD+Noise, 400 Hz
Distortion (THD+N): 0.03%
Frequency Response: 20 Hz-20 kHz ±0.5 dB

Dimensions (Overall):
4.2 inches wide (10.7 cm)
2.0 inches high (5.1 cm)
5.3 inches deep (13.5 cm)

Mounting: desktop; provision for stand mounting
available as option

Weight: 0.8 pounds (0.4 kg)

Model 70 Interface

Power Requirements: +20-32 Vdc (modulated
with left channel audio), provided by Model 55
Central Controller

Power Present LED: red, indicates presence of
operating power

Connectors:
Input (from Model 55):
3-pin XLR-type, female
Loop Thru: 3-pin XLR-type, male, connected in
parallel with input connector
Left and Right Line Outputs: 3-pin XLR-type,
male

Line Output: 1, stereo
Type: electronically balanced, intended to
drive loads of 600 ohms or greater, balanced
or unbalanced
Nominal Output Level: +4 dBu
Maximum Output Level: +20 dBu into 10 k ohms,
+19 dBu into 600 ohms
Frequency Response: 20 Hz-20 kHz +0/–0.5 dB
Distortion (THD+N): 0.02%

Dimensions (Overall):
4.2 inches wide (10.7 cm)
2.0 inches high (5.1 cm)
5.3 inches deep (13.5 cm)

Weight: 0.8 pounds (0.4 kg)

Specifi cations and information contained in this
User Guide subject to change without notice.

This manual is related to the following products: