Studio Technologies 5152 V.2 - Manual (Page 35)

Model 5152 User Guide Issue 4, September 2013
Studio Technologies, Inc. Page 35
Model 5152
Video Generator/Audio Embedder Module
Appendix B–DC Input/Data and GPI/GPO
Interconnection Details
The required mating receptacle is from the TE Connectivity (formerly AMP) MTA-100 series
of IDC (insulation displacement) connectors. This series was selected because of its low-
cost and wide range of offerings. Separate connectors are offered for compatibility with 22,
24, 26, and 28 AWG (American Wire Gauge) insulated wire. The connector color indicates
its AWG-compatibility. Unfortunately, with flexibility can come some confusion. The MTA-100
offers a number of different connectors that will work with the DC input/data and GPI/GPO
headers. Before obtaining receptacles it’s important to determine two things: wire gauge
and wiring arrangement. For this application 22 AWG is recommended.
DC Input/Data
• For 22 AWG wire this receptacle (red in color) is recommended:
TE Connectivity (AMP) 3-643813-4, closed-end type
Digi-Key part number A31108-ND
Mouser part number 571-3-643813-4
TE Connectivity (AMP) 3-644540-4, feed-through type
Digi-Key part number A31122-ND
Mouser part number 571-3-644540-4
GPI/GPO
• For 22 AWG wire this receptacle (red in color) is recommended:
TE Connectivity (AMP) 3-643813-3, closed-end type
Digi-Key part number 3-643813-3-ND
Mouser part number 571-3-643813-3
TE Connectivity (AMP) 3-644540-3, feed-through type
Digi-Key part number A31121-ND
Mouser part number 571-3-644540-3