Studio Technologies 5152 V.2 - Manual (Page 32)

Issue 4, September 2013 Model 5152 User Guide
Page 32 Studio Technologies, Inc.
Model 5152
Video Generator/Audio Embedder Module
modules that use DIN 1.0/2.3 and HD-BNC
connectors. In addition, they offer SFP
modules that provide an HDMI® output.
Several of these modules have been in-
stalled and tested in Model 5152 modules
at the factory and acceptable performance
was confirmed. It’s possible that special
applications could benefit from the features
provided by installing these non-optical
SFP modules in a Model 5152. For further
dialog about this topic please contact
Studio Technologies technical support.
USB Port Capabilities
The USB port, accessible on the Model
5152’s front panel, is provided for use in
only a few specific tasks. While it imple-
ments a high-speed USB host interface,
it is not intended for general-purpose use
and does not support connection with
mass-storage devices, personal comput-
ers, printers, etc. It is intended only for use
with USB flash drives. These devices can
contain image and firmware files that are
intended for loading into the Model 5152.
Details on these file-transfer functions can
be found in other sections of this guide.