Studio Technologies 76DBA V.3.00 - Manual (Page 30)

Issue 1, November 2010 Model 76DBA/77B User Guide
Page 30 Studio Technologies, Inc.
for Surround
Configuration—Input Select Buttons
Default: Surround input A assigned to input 1.
Surround input B assigned to input 2.
No input assigned to input 3 (disabled).
Stereo input A assigned to input 4.
Stereo input B assigned to input 5.
Stereo input C assigned to input 6.
Note: If no input is assigned to an input button that button is disabled.
Press and hold an input button to display and select which input
source is assigned to that button in Group 1-3. Press and hold both
the group select button and an input button to display and select
which input is assigned to that button when Group 4-6 is active.

When an input
button is pressed
use the 5.1 to
Stereo button to
assign surround
input A to that
button. Use the
Stereo to Mono
button to assign
surround input B
to that button.
When an input button is pressed use the L
and R buttons to assign stereo input A to
that button. Both L and R LEDs lit means
stereo input A is assigned to that button
as a stereo source; L LED only lit means
channel 1 of stereo input A is routed to the
center output and channel 2 is not used;
R LED only lit means channel 2 of stereo
input A is routed to the center output and
channel 1 is not used. When an input button is
pressed use the LS button
to assign stereo input C to
that button. Both LS and RS
LEDs lit means stereo input
C is assigned to that button
as a stereo source. Individ-
ual stereo input C channels
cannot be routed to center
output. When an input button is pressed use the C
and LFE buttons to assign stereo input B to
that button. Both C and LFE LEDs lit means
stereo input B is assigned to that button as a
stereo source; C LED only lit means channel
1 of stereo input B is routed to the center
output and channel 2 is not used; LFE LED
only lit means channel 2 of stereo input B is
routed to the center output and channel 1 is
not used.