Studio Technologies 76D V.2.02 - Manual (Page 37)

Model 76D/77 User Guide Issue 2, June 2009
Studio Technologies, Inc. Page 37
for Surround
way of sonically highlighting an individual
channel. A channel selected for soloing
in this mode will have its level increased
while the other non-soloed channels will
be reduced in level. To highlight this condi-
tion the letters POP will appear in the
4-digit display whenever a channel is
actively being soloed in the channel pop
solo mode. This ensures that a user will
understand that the monitor outputs no
longer represent the true inter-channel
level relationships.
Remote Control Inputs
As previously discussed in the Installation
section of this user guide, two remote con-
trol signals can be connected to the Model
76D and then configured for operation. The
functions are remote mute all and remote
dim. When an external signal activates
remote mute all the LED on the Model 77
associated with the mute all button will
flash. If mute all was already active when
the remote mute all function is activated,
the LED will change from being steadily
lit to flashing.
When an external signal activates remote
dim the LED on the Model 77 associated
with the dim button will flash. If dim was
already active when remote dim is acti-
vated, the LED will change from being
steadily lit to flashing.
Model 71 Control Console
The Model 71 Control Console provides
a limited number of pushbutton switches,
LEDs, and a rotary level control for op-
eration status display and control. The
two buttons, along with associated LEDs,
provide access to the dim and reference
level functions. A rotary level control allows
adjustment of the post-fader surround and
stereo monitor output level. A status LED
lights steadily whenever normal Model 71
operation is taking place.
Any changes made using the Model 71’s
rotary level control and buttons will be
reflected in the appropriate status LEDs
and displays on connected Model 77 and
Model 71 units. And, as expected, changes
made using a Model 77 will be reflected in
the Model 71’s LEDs.
Rotary Level Control
The rotary level control is used to manually
adjust the post-fader surround and stereo
monitor output level. Its operating charac-
teristics are identical to those of the Model
77 Control Console, discussed earlier in
this section.
Dim
The dim function allows the post-fader
surround and stereo monitor output level to
be reduced by a fixed amount. Its operat-
ing characteristics are identical to those of
the Model 77 Control Console, discussed
earlier in this section.
Reference Level
The reference level button sets the post-
fader surround and stereo monitor output
levels to their preset values. The operat-
ing characteristics are identical to those of
the Model 77 Control Console, discussed
earlier in this section.
Technical Notes
Loss of Sync
The Model 76D relies on an external timing
reference (sync) source for proper opera-
tion. This can be in the form of a word
clock, DARS (AES11), AES3id, bi-level
video, or tri-level video reference signal.