Studio Technologies 76D V.2.02 - Manual (Page 23)

Model 76D/77 User Guide Issue 2, June 2009
Studio Technologies, Inc. Page 23
for Surround
Configuration—Model 77 Device Address, Stereo Input C
Sample Rate Converter, and Post-Fader Stereo Output
Default: Device address A1.
Stereo input C sample rate converter enabled.
Post-fader stereo output can be enabled.
Note: The Model 77’s device address is the only parameter stored in the Model 77. All other parameters are stored
in the Model 76D.
Press and hold the Mute/Solo button
to display and select the Model 77’s
device address, stereo input C sample
rate converter, and post-fader stereo
output.
Use the Level control to change this
specific Model 77’s device address.
Address can be either A1, A2, A3, or A4.

When the Mode
button is pressed,
these LEDs
display the status
of the post-fader
stereo output
function. When
LED Surround
is lit the function
cannot be en-
abled. When LED
Stereo is lit the
function can be
enabled. Use the
button to change
the configuration.
This LED displays the configuration of the stereo
input C sample rate converter (SRC). LED not
lit means SRC is bypassed; LED lit means SRC
enabled. Use the button to change the configuration.