Studio Technologies 76D V.2.02 - Manual (Page 24)

Issue 2, June 2009 Model 76D/77 User Guide
Page 24 Studio Technologies, Inc.
for Surround
Configuration—Sync Type, Sync Input Termination, Audio-
Synced-to-Video Sample Rate, and Monitor Output Types
Default: Sync type video.
Sync input terminated.
Audio-synced-to-video sample rate 48 kHz.
Pre-fader surround/stereo input C direct monitor output type AES3 (110 ohms/5 Vpp).
Post-fader surround/stereo monitor output type AES3 (110 ohms/5 Vpp).
Use the Channel Solo C and LFE but-
tons to select the pre-fader surround/
stereo input C direct monitor output
type. Use the buttons to change the
configuration. C LED lit means AES3id
(75 ohms/1 Vpp); LFE LED lit means
AES3 (110 ohms/5 Vpp).
Use the level control to adjust the audio-
synced-to-video sample rate. Available
sample rates are 32, 44.1, 48, 88.2, 96,
176.4, and 192 kHz.
This LED displays the configuration
of the sync input termination. LED
not lit means sync input is not termi-
nated; LED lit means terminated with
75 ohms. Use the button to change
the configuration.
Use the Channel Solo LS and RS
buttons to select the post-fader
surround/stereo monitor output
type. Use the buttons to change
the configuration. LS LED lit means
AES3id (75 ohms/1 Vpp); RS LED
lit means AES (110 ohms/5 Vpp).
Use these buttons
to select sync type.
LED Surround B
lit means video
sync;
LED Stereo A lit
means DARS;
LED Stereo B lit
means word clock;
LED Stereo C lit
means sync to
surround input A.
Press and hold
the Stereo to
Mono button
to display and
select the sync
type, sync input
termination,
audio-synced-to
video-sample
rate, and moni-
tor output types.
