Studio Technologies 76D V.2.02 - Manual (Page 21)

Model 76D/77 User Guide Issue 2, June 2009
Studio Technologies, Inc. Page 21
for Surround
Channel Pop Solo Mode
Offset Levels
Two parameters can be configured that
set how the channel pop solo function will
impact audio levels. The up offset level
sets the amount of increase (gain) that a
channel will experience when it is soloed
in the channel pop solo mode. The down
offset level sets the amount of decrease
(attenuation) that the non-soloed channels
will experience when a channel is active in
the channel pop solo mode.
Restore Factory Defaults
The restore factory defaults function is pro-
vided primarily for factory use. In this way
a system can be shipped with the default
settings selected. While you are welcome
to use this function, be careful so that your
configuration efforts aren’t wasted. Spe-
cifically, be aware that the reference level
is reset to minimum level. All the other
parameters are fairly easy to set up, but
resetting the reference level would require
getting out an SPL meter and a calibrated
signal source. This is a hassle you may not
need!