Space Ray RSTP Series - Manual (Page 26)

Form 43206000
Sept 2011
-25-
To bring outside combustion air to the heater, you will need to order the RSTP Fresh Air Kit (Part #427820 RSTP Fresh Air Kit (Part #427820 RSTP Fresh Air Kit (Part #427820 RSTP Fresh Air Kit (Part #4278200 0 0 00) 0) 0) 0),
which includes one adapter plate. Refer to installation instruction below.
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS -- ---- -- RSTP FRESH AIR KIT RSTP FRESH AIR KIT RSTP FRESH AIR KIT RSTP FRESH AIR KIT -- ---- -- Part #42782000 Part #42782000 Part #42782000 Part #42782000
1. Remove the existing perforated panel from the top of the heater and replace it with the adapter plate from
the Fresh Air Kit.
2.
Insert a 6” starting collar (field supplied) and bend over the tabs to secure. Install the 6” diameter duct (not
supplied) and vent cap per guidelines above.
Perforated Panel
(remove)
Install
Adapter Plate
(Part #42783000)
6” Starting Collar for connection
to combustion air duct.
(field supplied)
Flue Outlet
Solid Cover Plate
Top Installation
Perforated Panel
(remove)
Install
Adapter Plate
(Part #42783000)
6” Starting Collar for
connection to combustion air duct.
(field supplied)
Flue Outlet
Install
Solid Cover Plate
Side Installation