Space Ray RSTP Series - Manual (Page 25)

Form 43206000
-24- Sept 2011
Flue vent termination
must be 1 ft. (30cm)
higher than combustion
air inlet cap
Perforated Cover
(Remove)
Control Box
The combustion air inlet should
be not less than 3 ft. (0.9m),
either vertically or horizontally,
from the flue vent termination.
Adapter Plate
Part #42783000
(Install) End View
6” Starting Collar
(field supplied)
Flue Collar
Combustion Air Cap
(Leslie VersaCap
Type B)
6” Diameter
Single-Wall Pipe
Flashing
1/2” (12mm) fall per 20ft (6m)
toward vent terminal
Horizontal
Through Sidewall
6” (15cm)
Minimum
6” Starting Collar
(field supplied)
3 ft. (91cm)
Minimum
Vertical
Through the roof
Control Box
Perforated Cover
(Remove)
Adapter Plate
Part #42783000
(Install)
End View
Alternate Combustion
Air Intake Location