Cv 42 f8 output location – SoundTraxx DSD-150/DSX Technical Reference User Manual
Page 34
Address Mode
Direct Mode
Register Mode
Ops Mode Short Form
Paged Mode
Ops Mode Long Form
34
Digital Sound Decoder Technical Reference
CV 42
F8 OUTPUT
LOCATION
Description
Maps the F8 function to any of eight DSD auxiliary function outputs as defined by a 1 in the
corresponding bit position:
bit 7
bit 0
MUTE
CPLR
DYNO
F5
Bit 0:
F5, Function 5 Output
0 = Output is unaffected by F8.
1 = Output is activated when F8 is on.
Bit 1:
DYNO, Dynamo Sound Effect
0 = Sound is unaffected by F8.
1 = Sound is activated when F8 is on.
Bit 2:
CPLR, Coupler Sound Effect
0 = Sound is unaffected by F8.
1 = Sound is activated when F8 is on.
Bit 3:
Reserved
Bit 4:
Reserved
Bit 5:
Reserved
Bit 6:
Reserved
Bit 7:
MUTE, Audio Mute Function
0 = Sound is unaffected by F8.
1 = Sound is muted when F8 is on.
A value of 00 sets F8 to control the MUTE function.
Default Value:
128 (0x80)
Related CVs:
See also CVs 33-42.
❐
■
❐
❐
■
■