Cv 40 f6 output location – SoundTraxx DSD-150/DSX Technical Reference User Manual

Page 32

Address Mode

Direct Mode

Ops Mode Short Form

Paged Mode

Ops Mode Long Form

Digital Sound Decoder Technical Reference

CV 40
F6 OUTPUT
LOCATION

Description
Maps the F6 function to any of eight DSD auxiliary function outputs as defined by a 1 in the
corresponding bit position:

bit 7

bit 0

CPLR

DYNO

HISS

BELL

WHSTL

Bit 0:

WHSTL, Whistle Sound Effect
0 = Sound is unaffected by F6.
1 = Sound is activated when F6 is on.

Bit 1:

BELL, Bell Sound Effect
0 = Sound is unaffected by F6.
1 = Sound is activated when F6 is on.

Bit 2:

HISS, Cylinder Blowdown/Hiss Sound Effect
0 = Sound is unaffected by F6.
1 = Sound is activated when F6 is on.

Bit 3:

F5, Function 5 Output
0 = Output is unaffected by F6.
1 = Output is activated when F6 is on.

Bit 4:

DYNO, Dynamo Sound Effect
0 = Sound is unaffected by F6.
1 = Sound is activated when F6 is on.

Bit 5:

CPLR, Coupler Sound Effect
0 = Sound is unaffected by F6.
1 = Sound is activated when F6 is on.

Bit 6:

Reserved

Bit 7:

Reserved

A value of 00 sets F6 to control the DYNAMO sound effect.

Default Value: 16 (0x10)

Related CVs: