Cv 33 fl(f) output location – SoundTraxx DSD-150/DSX Technical Reference User Manual

Page 25

Address Mode

Direct Mode

Ops Mode Short Form

Paged Mode

Ops Mode Long Form

Digital Sound Decoder Technical Reference

CV 33
FL(f) OUTPUT
LOCATION

Description
Maps the FL(fwd) function to any of eight DSD auxiliary function outputs as defined by a 1 in the
corresponding bit position:

bit 7

bit 0

DYNO

HISS

BELL

WHSTL

Bit 0:

HL, Head light output
0 = Output is unaffected by FL(fwd).
1 = Output is activated when FL(fwd) is on.

Bit 1:

BL, Backup light output
0 = Output is unaffected by FL(fwd).
1 = Output is activated when FL(fwd) is on.

Bit 2:

F1, Function 1 Output
0 = Output is unaffected by FL(fwd).
1 = Output is activated when FL(fwd) is on.

Bit 3:

WHSTL, Whistle Sound Effect
0 = Sound is unaffected by FL(fwd).
1 = Sound is activated when FL(fwd) is on.

Bit 4:

BELL, Bell Sound Effect
0 = Sound is unaffected by FL(fwd).
1 = Sound is activated when FL(fwd) is on.

Bit 5:

HISS, Cylinder Blowdown/Hiss Sound Effect
0 = Sound is unaffected by FL(fwd).
1 = Sound is activated when FL(fwd) is on.

Bit 6:

F5, Function 5 Output
0 = Output is unaffected by FL(fwd).
1 = Output is activated when FL(fwd) is on.

Bit 7:

DYNO, Dynamo Sound Effect
0 = Sound is unaffected by FL(fwd).
1 = Sound is activated when FL(fwd) is on.

A value of 00, sets FL(fwd) to control HL output.

Default Value: 1

Related CVs: