Cv 38 f4 output location – SoundTraxx DSD-150/DSX Technical Reference User Manual

Page 30

Address Mode

Direct Mode

Ops Mode Short Form

Paged Mode

Ops Mode Long Form

Digital Sound Decoder Technical Reference

CV 38
F4 OUTPUT
LOCATION

Description
Maps the F4 function to any of eight DSD auxiliary function outputs as defined by a 1 in the
corresponding bit position:

bit 7

bit 0

CPLR

DYNO

HISS

BELL

WHSTL

Bit 0:

WHSTL, Whistle Sound Effect
0 = Sound is unaffected by F4.
1 = Sound is activated when F4 is on.

Bit 1:

BELL, Bell Sound Effect
0 = Sound is unaffected by F4.
1 = Sound is activated when F4 is on.

Bit 2:

HISS, Cylinder Blowdown/Hiss Sound Effect
0 = Sound is unaffected by F4.
1 = Sound is activated when F4 is on.

Bit 3:

F5, Function 5 Output
0 = Output is unaffected by F4.
1 = Output is activated when F4 is on.

Bit 4:

DYNO, Dynamo Sound Effect
0 = Sound is unaffected by F4.
1 = Sound is activated when F4 is on.

Bit 5:

CPLR, Coupler Sound Effect
0 = Sound is unaffected by F4.
1 = Sound is activated when F4 is on.

Bit 6:

Reserved

Bit 7:

Reserved

A value of 00 sets F4 to control the HISS sound effect.

Default Value: 4

Related CVs: