Cv 36 f2 output location – SoundTraxx DSD-150/DSX Technical Reference User Manual

Page 28

Address Mode

Direct Mode

Ops Mode Short Form

Paged Mode

Ops Mode Long Form

Digital Sound Decoder Technical Reference

CV 36
F2 OUTPUT
LOCATION

Description
Maps the F2 function to any of eight DSD auxiliary function outputs as defined by a 1 in the
corresponding bit position:

bit 7

bit 0

DYNO

HISS

BELL

WHSTL

Bit 0:

HL, Head light output
0 = Output is unaffected by F2.
1 = Output is activated when F2 is on.

Bit 1:

BL, Backup light output
0 = Output is unaffected by F2.
1 = Output is activated when F2 is on.

Bit 2:

F1, Function 1 Output
0 = Output is unaffected by F2.
1 = Output is activated when F2 is on.

Bit 3:

WHSTL, Whistle Sound Effect
0 = Sound is unaffected by F2.
1 = Sound is activated when F2 is on.

Bit 4:

BELL, Bell Sound Effect
0 = Sound is unaffected by F2.
1 = Sound is activated when F2 is on.

Bit 5:

HISS, Cylinder Blowdown/Hiss Sound Effect
0 = Sound is unaffected by F2.
1 = Sound is activated when F2 is on.

Bit 6:

F5, Function 5 Output
0 = Output is unaffected by F2.
1 = Output is activated when F2 is on.

Bit 7:

DYNO, Dynamo Sound Effect
0 = Sound is unaffected by F2.
1 = Sound is activated when F2 is on.

A value of 00 sets F2 to control the WHISTLE sound effect.

Default Value: 8

Related CVs: