Cv 37 f3 output location – SoundTraxx DSD-150/DSX Technical Reference User Manual

Page 29

Address Mode

Direct Mode

Ops Mode Short Form

Paged Mode

Ops Mode Long Form

Digital Sound Decoder Technical Reference

CV 37
F3 OUTPUT
LOCATION

Description
Maps the F3 function to any of eight DSD auxiliary function outputs as defined by a 1 in the
corresponding bit position:

bit 7

bit 0

CPLR

DYNO

HISS

BELL

WHSTL

Bit 0:

WHSTL, Whistle Sound Effect
0 = Sound is unaffected by F3.
1 = Sound is activated when F3 is on.

Bit 1:

BELL, Bell Sound Effect
0 = Sound is unaffected by F3.
1 = Sound is activated when F3 is on.

Bit 2:

HISS, Cylinder Blowdown/Hiss Sound Effect
0 = Sound is unaffected by F3.
1 = Sound is activated when F3 is on.

Bit 3:

F5, Function 5 Output
0 = Output is unaffected by F3.
1 = Output is activated when F3 is on.

Bit 4:

DYNO, Dynamo Sound Effect
0 = Sound is unaffected by F3.
1 = Sound is activated when F3 is on.

Bit 5:

CPLR, Coupler Sound Effect
0 = Sound is unaffected by F3.
1 = Sound is activated when F3 is on.

Bit 6:

Reserved

Bit 7:

Reserved

A value of 00 sets F3 to control the BELL sound effect.

Default Value: 2

Related CVs: