SoundTraxx Coach Lighting Decoder Users Guide - Manual (Page 5)

SoundTraxx Lighting Decoder User’s Guide Page 2
Using Your SoundTraxx Lighting Decoder
Your SoundTraxx decoder has been shipped with all CVs pre-programmed
so you can begin using it in your model right out of the box without any
programming at all. Install your lighting decoder according to the installation
instructions that were included with the product. The default function
assignments are as follows:
Mobile Decoders
Function Key Effect
F0 Hyperlight Lighting Output
F5 Interior Lights
F6 Hyperlight Lighting Output
F7 Dimmer
While these are the default settings, you may wish to make changes to
the function mapping later. For now, simply set your model on the track,
select address 3, and press F5 to light the interior. As you can see, no
programming is necessary to enjoy your lighting decoder, but you will
probably wish to change the address to the number of the individual coach
or caboose. Alternatively you can assign a consist address that makes up
the train ID for a string of passenger coaches. The following section will
introduce you to CVs and how and why you may wish to change them.
Operation