SoundTraxx Coach Lighting Decoder Users Guide - Manual (Page 24)

SoundTraxx Lighting Decoder User’s Guide Page 21
To enable any of Functions F1 thru F8, refer to Table D below and circle the
numbers corresponding to the function inputs you want to enable. Then add
up the circled numbers and program this value into CV 13.
Similarly, to enable Function F9 thru F12 or F0, refer to Table E below and
circle the numbers corresponding to the function inputs you want turned on.
Then add up the circled numbers and program this value into CV 14.
Note that when you enable a particular function input for analog mode
operation, it has the same effect as pressing the equivalent function key
on your DCC cab. The Mobile Decoder’s function mapping settings will
ultimately determine which output or sound effect is activated by the enabled
function. Assuming you have not changed the default function mapping, then
enabling the F0(f) function in analog mode will turn on the F0(f) output.
Basic Programming
F8
13
CV# F1
1
F2
2
F3
4
F4
8
F5
16
F6
32
Table D. Analog Function Enable 1
F7
64 128
1 2
F0(f) F0(r)
14
CV# F12
4
F11
8
F10
16
F9
32
Table E. Analog Function Enable 2