SoundTraxx Coach Lighting Decoder Users Guide - Manual (Page 18)

SoundTraxx Lighting Decoder User’s Guide Page 15
Basic Programming
On-off
Dimmable
Mars Light
Gyralite
Oscillating Headlight
Single Flash Strobe
Double Flash Strobe
D312 Rotary Beacon
Prime Stratolite
Type I Ditch Light
Type II Ditch Light
FRED
Exhaust Flicker
Firebox Flicker
Reserved
Dyno-Light
Effect Type
Phase A Phase B
CV Value
Crossing Logic Off Crossing Logic On
Phase A Phase B
0
1
2
3
4
5
6
7
8
9
10
11
12
13
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
63
Table A. Hyperlight Control Mode Settings
1. We first look up the initial CV value in Table A for a Mars Light under the
column labeled ‘Crossing Logic On’ and find it is 34 for Phase A and 50
for Phase B. Since we are only setting up one light, we do not care about
the Phase and choose the value for Phase A, 34.
2. Since we are not using Rule 17, we skip to Step 3.
3. Since we are not using LEDs, we skip to Step 4.
4. CV 49 (Headlight Configuration) is programmed with the value found in
Step 1 or 34.
Lastly, we need to set the grade crossing hold time to about six seconds by
programming CV 60 to 6.