SONOSAX STELLADAT II - Manual (Page 22)

22
Accessory Socket
The Acc socket (page 12) allows connecting an external parallel remote. The socket is of
type SONOSAX # 002211 (Arting or compatible). Here is the pin-out table of the socket:
1 MON L
2 MON GND
3 MON R
4 GND
5 GND
6 ACCESSORY
7 PRG
8 REW
9 MON
10 REC
11 ACCSDA
12
13
ACCSCL
14 DGND
15 U LED (100mA max)
16 +5V (100mA max)
17 STOP
18 PAUSE
19 FWD
20 PLAY
Monitoring
The monitoring selector , page 10 (shown above) is used to select one two tracks to be
monitored with the headphones and with the control loudspeaker. The MONO / STEREO
selector
specifies the listening mode and the monitoring level control adjusts the listening
level.
Headphones
The headphones are to be plugged into the PHONES socket (6.25 mm stereo Jack, +15 dBu
@ 200 Ω ) located on the left side of the recorder. The monitoring of MS stereo with the phones is
easy thanks to an MS matrix, switched ON or OFF with the MS switch , in the center of the
monitoring pane.