SONOSAX SX-R4 (Firmware v3.1) - Manual (Page 35)

User manual SONOSAX SX-R4 Page 35 of 53
SETUP > TIMECODE SETTINGS > RUNNING MODE
Two possible choices:
•
FREE RUN
•
RECORD RUN
In FREE RUN mode, the Timecode is absolute and linear. It runs continuously and never stops.
In RECORD RUN, mode, the Timecode is generated only while Recording.
SETUP > TIMECODE SETTINGS > SET MANUAL
Use this menu to set the Timecode value manually.
SETUP > TIMECODE SETTINGS > SET FROM TIME
The value of the Timecode address is adjusted exactly on the time of real time clock of the SX-R4.
5.8.6 MODULOMETERS
SETUP > MODULOMETERS SETTINGS > REFERENCE
This menu allows to set and display a vertical line corresponding to a reference level for the modulometers
on the TRACK MONITORING :
•
NONE
•
- 9 dB
•
-12 dB
•
-18 dB
•
-20 dB
SETUP > MODULOMETERS SETTINGS > HOLD TIME
The function "Hold Time" detects the absolute peak level and keeps it posted for:
•
NONE
•
3 secondes
•
10 secondes
•
2 minutes
•
INFINITE
5.8.7 USER SETTINGS
SETUP > USER SETTINGS
The "User Settings" menu allows to save, to load or to update a complete configuration to/from an ASCII file
CREATE NEW
Create a new configuration file based on the current (active) configuration of the SX-R4.
The setting name is formatted as follow:
•
8 characters maximum
•
alphanuméric characters, space and underscore only (A..Z, 0..9, _)
RECALL SELECTED
Load the selected configuration file. Caution: this operation will crush the current configuration !
DELETE SELECTED
Delete the selected configuration file.
OVERWRITE SELECTED
Overwrite an existing configuration by the current configuration of the SX-R4.