SONOSAX SX-R4 (Firmware v3.1) User Manual
Page 23

User manual
SONOSAX SX-R4
Page 23 of 53
5.6.1 PLAYER Mode
Where a TAKE is loaded either by the LAST TAKE menu or by the BROWSE FILE menu, the SX-R4 will
switch to PLAYER mode and it reconfigures itself automatically with the same parameters as during the
recording of the concerned Take; Routing - Monitoring - Line Out - Headphone Volume etc.
This screen displays a Play Back page illustrated here below:
The tables below show the actions of the Joystick and of the Toggle Switch:
Joystick
Short pressure
Long pressure
LEFT
Reduce the headphone volume in
1dB steps
Reduce the volume continuously
down to minimum
RIGHT
Increase the headphone volume in
1dB steps
Increase the volume continuously
up to maximum
UP or DOWN
Call SOLO MONITORING page
CENTER
Call the CONTEXCTUAL MENU page
Lock/Unlock the Joystick and the
toggle switch
Toggle switch
Short pressure
Long pressure
LEFT
Play the selected Take
LEFT while Playing
PAUSES at current position
STOP playing
RIGHT
Switches to Record mode and start
recording (scratch record, see note
below)
NOTE:
pressing the toggle switch to the right [REC] while playing a Take or at any time, the SX-R4
automatically switches back to recording mode and immediately starts recording a new Take
(Scratch Record). In this case the pre-record buffer remain empty, thus the pre-record time is
equal to zero.
TimeCode of the TAKE
(HH :MM :SS)
Active tracks
Reference Level
Joystick Center action
TAKE number
Battery level indicator