SONOSAX SX-62R Quick_Start - Manual (Page 7)

SONOSAX SX62R Quick Start Guide Page 7 of 34
3. MAIN MENU
Pressing the main screen anywhere above the blue area will call the Main Set Up Menu. Pressing any key will
call a Sub-Menu
<= Indicated the status of the recorder
[INPUT] configure the input channels of the mixer
[OUTPUTS] configure the outputs of the mixer
[TAG LAST TAKE] tag as False start, Wild track,
No good or Circled
[METADATA] edit the Metadatas
[HEADPHONE] configure the Headphones
outputs
[BROWSE FILES] browse recorded takes in the
HD or CF card
[BACK] return to the main screen
[SETUP] configure all parameters of the recorder
[LAST TAKES] displays the last recorded takes
4. ANALOGUE MIXER SECTION
4.1 MIC/LINE INPUT
- Pre LF-Cut (135Hz at 6dB/octave)
(acting before the mic preamplifier)
- GAIN Trim +/- 20dB combined with the Gain preset
from -6dB up to 80dB of input Gain
- GAIN Preset
Mid 40dB (20 to 60dB) - Low12dB (-6 to 32dB)
High 60dB (40 to 80dB)
- Sweep LF Cut 20 to 350Hz at 12dB/octave
releasing the knob activates the PFL
(retractable potentiometer)
- PANORAMA configurable in the settings menu
- Rotating Fader from – infinite to +20dB
NOTE: secondary functions are controlled by a specific menu explained in following chapters, such as
power On/Off, 48Vphantom, polarity (phase) reversal, Limiter threshold, Stereo link, M/S decoding,
Fader linking, channel assignment and routing,