SOMFY Sonesse Ultra 50 RTS - Manual (Page 3)

3 Copyright © 2014 Somfy SAS. All rights reserved.
EN
Images not contractually binding
Contents
1. Prerequisite information 12
1.1 Fields of application 12
1.2 liability 13
2. Installation 13
2.1. Installation 13
2.2. Wiring 14
2.3. Commissioning 15
2.4. Tips and recommendations for
installation 17
3. Use and maintenance 18
3.1. Up and Down buttons 18
3.2. STOP function 18
3.3. Favourite position (my) 18
3.4. Additional settings 19
3.5. Tips and recommendations for use 19
4. technical data 20
ORIGINAL GUIDE
1. PrereqUIsIte InformatIon
1.1 fIelds of aPPlICatIon
The Sonesse 50 drive is designed to drive all types of indoor awning
(Roller blinds and projection screens), excluding pantographs.
The Sonesse 50 drive is designed to drive multi-banding roller blinds.
The Sonesse 50 drive is designed to drive several roller blinds simultaneously, where these are
interconnected by a drive bracket.
The Sonesse 50 drive is not designed to be used with a compensating spring.
Any use outside the fields of application is prohibited, in particular:
The Sonesse 50 drive is not designed for outdoor awnings (e.g. outdoor vertical blinds, roller
shutters, etc.)
The Sonesse Ultra 50 RTS drive has been developed to meet indoor awning drive requirements.
Its quiet operation ensures user comfort and well-being.
For more information, and to optimise the acoustic performance of your indoor awning, please
contact a Somfy adviser.
These instructions applies to all Sonesse Ultra 50 RTS and Sonesse Ultra 50 RTS RH drive
irrespective of torque and speed variations.