Smithco Spray Star 1000 (sn 100489 – 100523) Parts & Service Manual - Manual (Page 93)

91
Accessories
1010
(MANUAL)
HOSE REEL PLUMBING PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 15-736 Elbow 1
2 15-776 Tee 1
3 15-749 Hose Barb 1
4 15-738 Ball Valve 1
5 15-740 50 Seires Clamp 1
INSTALLATION INATRUCTIONS
1. Disconnect the ball valve from the elbow fitting on the outside of the filter assembly. Install 15-776 tee
fitting (Ref 2) between the ball valve and the elbow. Use the clamp that was removed and on of the new
ones provided. Only tighten clamps enough so it can be rotated.
2. Install 15-749 hose barb (Ref 3) onto the 15-738 ball valve (Ref 4) using a 50 series clamp (Ref 5) Tighten
clamp. Install the ball valve and hose barb to the 15-776 tee (Ref 2) that was installed in step 1.
3. Rotate the tee fitting so the valve points toward the outside of the machine, just behind the filter assembly.
Tighten all clamps.
4. Route the 3/4" orange hose from the hose barb you installed in step 2 to the hose barb on the hose reel.
Secure with 18-040 Hose clamps.
5. When installing the hose reel with a manual spray system you will have a reducer coupling and an elbow
coupling left over that you will not need.