Smithco Spray Star 1000 (sn 100489 – 100523) Parts & Service Manual - Manual (Page 70)

68
Accessories
NOZZLE ASSEMBLY DRAWING
REF# PART# DESCRIPTION QUANTITY
1* 16-920-03 O-Ring 1
2 16-920-05 Diaphragm Teflon (Optional) 1
3* 16-920-06 Diaphragm EPDM Rubber (Standard) 1
4* 16-798 Chemsaver End Cap 1
5 16-800 Gasket Viton 1
6 16-921 Cap 1
7 15-588 Turbo Turf Jet Tip #8 1
8 16-802 Brass Strainer 1
* 16-996 Body 1
When the 16-920-05 Teflon Diaphragm is used, it is placed in the assembly in front of the 16-
920-06 EPDM Rubber Diaphragm. Nozzles are located 20" (51 cm) apart on the right, left, and
center tubes. There are predrilled holes in all tubes. The Nozzle should be at a 45° angle to
For all 15' Booms: The nine 16-996 bodies are installed on the boom sections. The nine
16-800 viton gasket, 16-802 strainers, 15-588 Turbo Turf Jet Tip #8 and 16-921 cap are in the
small parts bag.