Smithco Spray Star 1000 (sn 100489 – 100523) Parts & Service Manual - Manual (Page 89)

87
Accessories
HOSE REEL MOUNT PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 HB-516-18-150 Bolt 5 /
16
- 18 x1 1 /
2
4
HNTL-516-18 Lock Nut 5 /
16
- 18 4
2 10-423 Hose Reel Mount 1
3 17-537 Square U-bolt 2
4 18-249 Barb Fitting 1
5 16-295 Hose e Fitting 1
1. Wear protective clothing when draining the tank and taking apart the lines.
2. Drain tank and spray system in a safe and approved method insuring that no chemical or water remain in
tank as you will be taking apart lines.
3. Remove key from ignition, set park brake and block wheels.
4. Install hose reel mount on the left side of the machine in front of the rear wheel. Mount arms pointing to
the rear of the machine.
5. Use the u-bolts to secure the mount to the machine.
6. Put hose reel on hose reel bracket with fitting to the rear of machine. Use four bolts 5 /
16
- 18 x 1 1 /
2
and four
5 /
16
- 18 lock nuts to hold in place. Tighten bolts.
7. Put 18-249 barb fitting into side of hose reel. Place 16-295 Fitting into center of hose reel. Run 55" hose
from the 18-249- to the 15-749 hose barb.