Skutt GlassMaster Kiln - Manual (Page 4)

4
4 K
iln
s
afeTy
Tens of thousands of kilns are used safely in homes, schools, and professional studios throughout the world.
With a good understanding of your kiln and a little common sense, you can avoid any accidents. Please observe
the following safety recommendations:
♦ The stainless steel jacket and some of the other fixtures surrounding the kiln
will get hot enough to burn your skin when the kiln is heated. Therefore,
it is important to be extremely careful when working close to the kiln. We
recommend posting warning signs of this potential hazard in the kiln room.
♦ Keep anyone who cannot understand warning signs such as small children
and pets away from the kiln when it is firing.
♦ Be careful when opening the kiln door while the kiln is heated. We
recommend you use fire rated gloves to protect your skin and make sure
clothing is kept well away from any kiln opening or hot kiln surface.
♦ The elements inside the kiln chamber will cause an
electrical shock if touched. Never insert metal instruments
or place any part of your body into the kiln while it is
firing.
♦ Always be sure to unplug the kiln before working on the
electrical components. If the kiln is hardwired, turn off the
circuit breaker.
♦ Plan on being with the kiln when it is scheduled to turn off.
♦ Remove all potentially combustible materials from the kiln area.
♦ Long term viewing inside the kiln chamber can cause damage to your eyes.
Therefore it is recommended that you use IR and UV protective glasses when
looking into the kiln for extended periods of time. #3 welders green or gray
glasses will protect your eyes.
♦ Be cautious of intense heat around the peep holes when the peep plugs are
removed.
♦ In the event of a severe storm, unplug your kiln.
Exposure to static shock or electrical surges can
damage the circuit board in the controller.
♦ The kilns lids on many models are heavy. Make
sure the lid brace is secure before releasing the lid.
Make sure the hardware that secures the lid brace
is secure and not corroded.
♦ Do not place anything in the kiln you are unsure of. Certain items may
potentially melt, explode, or release toxic fumes.
♦ Never allow your kiln to exceed the temperature rating listed on the serial
plate.
♦ For your safety and the protection of your kiln, we recommend that you avoid
unloading the kiln when it is above 125ºF (51.7ºC).
♦ The controller is a temperature control device. It is not a safety device.
♦ The maximum operating temperature is 100ºF (38ºC). This temperature refers
to the room temperature while the kiln is firing and does not pertain to the
internal temperature of the kiln.
Be Safe