SIGMA DP3 Merrill - Manual (Page 42)

41
TO REMOVE THE CARD
1
Turn off the camera and slide the
Release lever to the OPEN position to
open the Battery / Card Cover as shown
in the illustration.
2
Push the card until it clicks and pull out it.
3
Close the Battery / Card Cover and slide
the Release lever to the LOCK
position
as shown in the illustration.
WARNING!!

While the Busy Lamp is on, please do not open the Battery Cover
or Card Cover. By doing so, the camera will turn off and result in
data loss. This could also cause damage to the camera and/or
memory card.