SIGMA DP3 Merrill - Manual (Page 126)

125
The shutter does not release.
The camera is busy writing to the card.
► Please wait until the card busy light goes off.
Card is full.
►
Insert a new card or delete unwanted images. (P.93 - 95)
Autofocus does not operate.
Focusing mode is set to MF.
►
Change the focusing mode by pressing the Focus mode button.
(P.49)
The camera has turned off automatically.
Auto Power Off is activated.
►
The Auto Power Off function is set in order to conserve battery
power. If it is inconvenient, please set the Auto Power Off to “Off”.
(P.116)
Cannot shoot or store images.
Card is full
►
Insert a new card or delete unwanted images. (P.93 - 95)
Battery is exhausted.
► Replace the battery. (P.18 - 22)
The write protection switch is in the ‘LOCK’ position.
►
Please unlock the write protection switch on the card. (P.10)
Image data on the card is corrupted.
►
If important data remains in the card after transferring it to your PC,
please format the card. (P.42)
Difficulty seeing the images on the color LCD monitor.
Dust or dirt has adhered to the color LCD monitor.
► Clean the color LCD monitor with a blower or eyeglass cloth.
(P.121)
The color LCD monitor is worn out.
► Please consult the retailer from which you purchased the camera
or contact the nearest Sigma Service Center.