Sierra Video Yosemite - Manual (Page 57)

INSTALLATION
51
504001-03 S1 and S2 DIP Switch Settings
Dip
Switch Action
S1 S2
1 Terminal port speed:
OFF = 9.6K baud*
On = 19.2K baud
Host protocol send X (or Y, V) command:
OFF = initially disabled (U1 enables)
ON = initially enabled (U0 disables)*
2 Terminal port initial protocol:
OFF = Terminal protocol*
ON = Host protocol
Panel RS-485 port speed
OFF = 9.6K baud
ON = 31.25K baud*
3 Host port speed:
4 OFF 3 OFF 1.2K baud
4 OFF 3 ON 9.6K baud*
4 ON 3 OFF 38.4K baud
4 ON 3 ON 111.2K baud
Software download and update
OFF = normal operation
ON = download new software 4
5 Host port data bits:
OFF = 7 data bits
ON = 8 data bits*
Host port initial protocol:
OFF = Terminal protocol
ON = Host protocol*
6 Host port parity:
OFF = even*
ON = odd
For router status, send:
OFF = an X cmd for each level *
ON = mix Y, X, or V commands (use shortest)
7 Host port parity enable:
OFF = parity disabled*
ON = parity enabled
Force crosspoint initialization:
OFF = restore previous crosspoints*
ON = set initial xpts to 1-2, 2-2, etc.
8 Host port XON/XOFF send:
OFF = disabled
ON = enabled*
Force router re-initialization to factory configuration
settings:
0FF = normal*
ON = reinitialize
* = Factory default setting