beautypg.com

Serial port assignments – Sierra Video View MADI-XX User Manual

Page 36

background image

SIERRA VIDEO


30

Serial port assignments

Jumpers JP1 and JP2 are located on the RS232 pcb at the rear of the unit. Access requires the
removal of the top cover with the power removed as explained in the 'Removing the top cover'
section.

JP1 – DTS/RTS select (normally no jumper)
JP2 – Half duplex jumper on 1 & 2; Full duplex jumper on 2 & 3

Note: Pin 1 is the first left most pin of each three pin block.

This manual is related to the following products: