Sierra Video View MADI-XX - Manual (Page 24)

SIERRA VIDEO
18
Phase Bars – phase bar and multi-indicator settings
Phase bar settings
The phase bar can be positioned at the top or bottom of the screen and assigned to any channel
pair.
Note: The assigned channel pair will be highlighted during selection from the on-screen mimic.
It can also be assigned to the on-screen cursor controlled by the Select Parameter Left/Right
keys, so that moving the cursor assigns the phase bar.
Multi-indicators
Multi-indicators appear above each pair of bars but below any alarm indicators. In Phase and
Out of Phase color assignments are the same for both multi-indicators and the assignable phase
bar.