Sierra Video View MADI-XX - Manual (Page 28)

SIERRA VIDEO
22
User configuration
The MADI-xx has four user memories, USER 1, USER 2, USER 3 and USER 4. Settings can be
copied from one user to the other and further changes can be made before saving. Any changes
made are saved automatically when exiting the menu by briefly pressing the ‘Lock’ button,
whichever User is selected.
Note: A separate set of channel labels may be saved for both User 1 and User 2 memories.
Applying ‘Reset User n’ returns the settings of user ‘n’ memory to the factory default. Factory
defaults may also be applied with a Master Reset as explained in the Trouble Shooting chapter.
Reset and Copy functions require the Lock and Insert On buttons to be pressed together as
confirmation.
Network Settings
These settings only need to be manually entered if DHCP is set to NO. This would be required for
a network that uses fixed IP addresses and does not rely on a DHCP server to allocate them
automatically.
If DHCP is used, the settings are grayed out but should nevertheless be valid provided the
DHCP server has updated the frame. The MAC address is the physical address of the IP port; it
is unique to the frame and cannot be changed.
Tip: The IP address must be unique on the network. Please see your system administrator if these details
are required.