Sierra Video 3232HD-3G - Manual (Page 48)

SIERRA VIDEO
38
Salvo
Salvos are programmed via the web page (see the Salvo Setup Section).
To fire a Salvo;
 Select the FUNC button. The button turns YELLOW
 Select the SALVO button. This button will illuminate BLUE.
 Buttons One (1) to Sixteen (16) in the INPUT section illuminate BLUE to indicate
programmed salvos.
 Select any of the illuminated buttons. The selected button will blink CYAN.
 The TAKE button begins to blink red
 Select TAKE
• The salvo is executed
• The FUNC button turns off
• The front panel returns to normal operation mode
Note:
On the Aspen 32x32, the SALVO button is output button 25. On the Aspen 16x16, the SALVO
button is output button 9.