Sierra Video 3232HD-3G - Manual (Page 30)

SIERRA VIDEO
20
Layers
The “Layers” screen is used for adding external devices (Layers) to the existing routing
switcher.
The “refresh” button will re-read the current settings in the routing switcher.
Make any changes necessary and press “Save” to implement changes.
Enter the number of external layers you want to add and press “Apply”.
Select the correct layer type from the dropdown list.
The “Video/Audio” selection determins whether the “A” or “V” button on the front panel
will control the level.
Control Type can be Serial or Ethernet.
Note:
To control external layers over Serial, the routing switcher must be set to “Master” mode (see
“Serial” tab).